Replacement Windows - Vinyl - Fiberglass - Wood - Aluminum |
“You will often hear contractors and manufacturers use the terms New Construction or Replacement (Retrofit) when discussing residential windows. While neither window must be used exclusively for the project after which they're named, each has specific advantages designed for these different installation methods. New Construction Window New construction windows typically have a nail fin. When homes are built, the framing is likely constructed of wood studs. The nail fin rests against the outside of the stud, and nails or screws are driven through the holes in the fin. All other exterior materials are then applied and butted up to the frame of the window or trim.New construction windows also can be used in a replacement project. The exterior materials, such as window trim (if it exists), siding, stucco or flashing, are removed, exposing the wood studs. The new window is then installed as it would have been when the home was originally built. Exposing the original studs also allows your contractor to see potential damage (typically rot) or home settling that may have occurred. The damage can be repaired, and the new window installed with proper insulation to minimize air infiltration between the new window and the studs. As you can imagine, this method can be more time consuming so often costs more than other replacement methods. Replacement (Retrofit) WindowReplacement windows have been developed as a labor and cost-cutting alternative. There are two main types of replacement windows:
NFRC Label For either New Construction or Replacement windows, be sure to look for certain features that differentiate between high and low-quality windows. Some key elements to look for include:
Vinyl Dual pane Energy Efficient Predominately White or Tan Can come in bronze by certain manufacturers Welded corners Glass can include grids, tint, or obscure glass Cannot be painted or stained Does not conduct heat or cold Extruded frames Cost effective Custom made to your size Replacement or new construction Fiberglass Dual pane Energy Efficient Standard colors include: White, Bronze, Tan, Sand, Hunter Green, Cranberry/Red, Silver and more Can choose your own color (some manufacturers charge) Can be painted or stained Can be painted dark colors without compromising its structural integrity Glass can include grids, true divided lites, tint, or obscure glass Protruded frames Non welded corners – Corners are assembled using corner keys that are screwed together and injected with silicone Weather resistant – impervious to water, heat, cold, insects, salt air, ultra violet rays Eight times stronger than vinyl Custom made to your size Replacement or new construction Wood-Clad (Aluminum) Dual pane Energy Efficient Standard colors Can choose your own color (some manufacturers charge) Exterior can be painted, interior can be stained or painted Mix and match exterior colors Extruded frame or roll form (depending on manufacturer) Glass can include grids, true divided lites, tint, or obscure glass Weather resistant – impervious to water, heat, cold, insects, salt air, & ultra violet rays Multiple interior wood species Radius doors More traditional look interior Resembles traditional wood windows Exterior trim available ie: casing or brickmold Some maintence required Custom made to your size Replacement or new construction Serving Southern California:
|
17985 Collier Ave, Lake Elsinore CA 92530 • Toll Free: 800.810.2505
Phone: 951.674.4200 • Fax: 951.674.4454 • Email us at: bakerwindows@verizon.net